Detail Specifications
Body Material:
Steel, stainless
Body Style:
Standard round c
Shoulder Diameter:
Between 1.5615 inches and 1.5620 inches
Pilot Diameter:
Between 0.9370 inches and 0.9375 inches
Overall Length:
3.0600 inches
Flange Diameter:
Between 1.7450 inches and 1.7500 inches
Flange Thickness:
0.0930 inches
Undercut Diameter:
1.6250 inches
Undercut Width:
0.0780 inches
Shaft Diameter:
0.1870 inches single shaft and 0.1872 inches single shaft
Shaft Length:
0.5400 inches single shaft
Maximum Tempurature Rise:
20.0 degrees celsius
Stator Input Voltage Rating In Volts:
90.0
Stator Input Current Rating:
7.0 milliamperes
Stator Input Electrical Power Rating:
50.0 milliwatts
Frequency In Hertz:
400.0
Zso Impedance Magnitude In Ohms:
Between 12000.00 and 14800.00
Zso Impedance Angle In Deg:
Between 82.00 and 84.50
Zrs Impedance Magnitude In Ohms:
Between 980.00 and 1180.00
Zrs Impedance Angle In Deg:
Between 42.00 and 52.00
Phase Shift Angle In Deg:
2.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
20.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
30.00
Electrical Error Angular Range In Minutes:
-6.0/+6.0
Spline Tooth Quantity:
21 single shaft
Torque Gradient Per Angular Deg:
0.100 inch-ounces
Alignment Hole Quantity:
4
Pilot Length:
0.0400 inches
Shoulder Length:
0.1320 inches
Mounting Surface To Terminal End Distance:
2.5200 inches
Spline Tooth Diametral Pitch:
120 single shaft
Shaft Thread Series Designator:
Unf single shaft
Shaft Thread Direction:
Right-hand single shaft
Shaft Thread Length:
0.2000 inches single shaft
Shaft Type:
Spline w/threads single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.735 rotor to stator
Alignment Hole Bolt Circle Diameter:
1.2500 inches
Shaft Thread Size:
0.190 inches single shaft
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
5 screw
Specification Data:
81349-mil-s-20708/29 government specification
Item Name:
Synchro,control Transformer
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC